Thick denim folded into three layers for a flat fell seam
Evenly sews thick fabrics effortlessly.
The BOX Feed system
Stay in contact with your fabrics longer for a consistent, reliable seams every time.
Stitching thin fabrics
No fabric shrinkage even sewing on light weight cotton.
Stitching towel fabrics
Evenly feeds hard-to-sew high pile fabrics.
Straight Stitch Slide Plate
Simply slide the front lever to switch to a single needle hole! Sew the lightest fabrics with perfect needle permeation. The single needle plate will not allow fabrics to be pushed into the needle hole. Free motion stitch with precision and perfection. Sew with confidence, when the single needle hole plate is set, only the straight stitch patterns can be selected.
Needle hole for straight stitches
Normal needle hole
Float Function Prevents Uneven Seams
By pressing the float button, you can sew with the presser foot slightly raised. By raising the presser foot to float you can sew fabrics without pushing layers or creating uneven seams.
You can sew with the presser foot slightly floated.
The height of the presser foot can be set in increments of 0.1 mm, allowing delicate adjustment according to the materials.
Using the float function
The standard presser foot is used in both cases.
Not using the float function
Pressure on layers create uneven seams.
| Control System | Computer |
| Number of Stitch Patterns | 287 |
| Number of Available Fonts | 4 |
| Buttonhole | Automatic (sensor system) with clamping plate |
| Direct Stitch Pattern Selection | 10 patterns |
| Start/Stop Button Indicator |
|
| Maximum Stitch Speed | 1,050 sti/min |
| Thread Tension System | Automatic |
| Presser Foot Pressure Adjustment | Stepless adjustment |
| Bobbin Thread Winder | Independent motor |
| Light | 1 LED |
| Stitch Length/Width Adjustment | Button system |
| Needle Positions | 37 (straight) / 3 (others) |
| Memory Function | 10 patterns |
| Presser Foot Lift Height |
|
| Wide Table | Included |
| Foot Controller | Included (with foot switch) |
| Auto Thread Trimming | Yes |
| Automatic Needle Threader | Yes |
| Automatic Lock Stitch & Trim | Yes |
| BOX Feed Mechanism | Yes |
| Drop Feed | Yes |
| Quick Bobbin Preparation | Yes |
| Straight Stitch Slide Plate | Yes |
| Float Function | Yes |
| Free Arm | Yes |
| Pattern Reverse (L/R) | Yes |
| Twin Needle Sewing | Yes |
| Adjustable Stitch Speed | Yes |
| Lock Stitch | Yes |
| Low-Speed Inching Sewing | Yes |
| Presser Foot Pivot | Yes |
| Foot Horizontality Holder | Yes |
| Hard Case | With accessory storage |
| Knee Lifting Lever | Yes |
| Dimensions | 445(W) x 291(H) x 210(D) mm |
| Dimensions with Case | 510(W) x 305(H) x 257(D) mm |
| Arm Size | 8.0" x 4.4" (203 x 112 mm) |
| Weight | 10.3 kg (21.6 lbs) |
| Accessories |
|
Create unlimited custom tabs and add any product detail, module, widget, design or HTML. Also possible to create custom tab layout using layout builder
Juki HZL-DX Series Sewing Machine HZL-DX7
- Product Code: juki-hzl-dx7
Thick denim folded into three layers for a flat fell seam
Evenly sews thick fabrics effortlessly.
The BOX Feed system
Stay in contact with your fabrics longer for a consistent, reliable seams every time.
Stitching thin fabrics
No fabric shrinkage even sewing on light weight cotton.
Stitching towel fabrics
Evenly feeds hard-to-sew high pile fabrics.
Straight Stitch Slide Plate
Simply slide the front lever to switch to a single needle hole! Sew the lightest fabrics with perfect needle permeation. The single needle plate will not allow fabrics to be pushed into the needle hole. Free motion stitch with precision and perfection. Sew with confidence, when the single needle hole plate is set, only the straight stitch patterns can be selected.
Needle hole for straight stitches
Normal needle hole
Float Function Prevents Uneven Seams
By pressing the float button, you can sew with the presser foot slightly raised. By raising the presser foot to float you can sew fabrics without pushing layers or creating uneven seams.
You can sew with the presser foot slightly floated.
The height of the presser foot can be set in increments of 0.1 mm, allowing delicate adjustment according to the materials.
Using the float function
The standard presser foot is used in both cases.
Not using the float function
Pressure on layers create uneven seams.
| Control System | Computer |
| Number of Stitch Patterns | 287 |
| Number of Available Fonts | 4 |
| Buttonhole | Automatic (sensor system) with clamping plate |
| Direct Stitch Pattern Selection | 10 patterns |
| Start/Stop Button Indicator |
|
| Maximum Stitch Speed | 1,050 sti/min |
| Thread Tension System | Automatic |
| Presser Foot Pressure Adjustment | Stepless adjustment |
| Bobbin Thread Winder | Independent motor |
| Light | 1 LED |
| Stitch Length/Width Adjustment | Button system |
| Needle Positions | 37 (straight) / 3 (others) |
| Memory Function | 10 patterns |
| Presser Foot Lift Height |
|
| Wide Table | Included |
| Foot Controller | Included (with foot switch) |
| Auto Thread Trimming | Yes |
| Automatic Needle Threader | Yes |
| Automatic Lock Stitch & Trim | Yes |
| BOX Feed Mechanism | Yes |
| Drop Feed | Yes |
| Quick Bobbin Preparation | Yes |
| Straight Stitch Slide Plate | Yes |
| Float Function | Yes |
| Free Arm | Yes |
| Pattern Reverse (L/R) | Yes |
| Twin Needle Sewing | Yes |
| Adjustable Stitch Speed | Yes |
| Lock Stitch | Yes |
| Low-Speed Inching Sewing | Yes |
| Presser Foot Pivot | Yes |
| Foot Horizontality Holder | Yes |
| Hard Case | With accessory storage |
| Knee Lifting Lever | Yes |
| Dimensions | 445(W) x 291(H) x 210(D) mm |
| Dimensions with Case | 510(W) x 305(H) x 257(D) mm |
| Arm Size | 8.0" x 4.4" (203 x 112 mm) |
| Weight | 10.3 kg (21.6 lbs) |
| Accessories |
|
- Brand: Juki
- Viewed: 31
- Availability: In Stock
$900.00
Tags:jukihzl dx7sewing machinecomputerized sewing machinequilting machineprofessional sewingjuki sewing machinetextilecraftinghome sewing



